Flashings for L shaped Combination Windows EUN/B, EUV/B, EUV-L/B

The flashings EU_/B are intended to be used only with new series of L-shaped B_L windows. The flashings are designed to help provide a weather-resistant connection between compatible roof windows and windows installed in vertical walls.

The flashings are available in three different depths of window installation into the roof structure:

N(+3 cm),V(0)
J( -3 cm)-to individual order.

A standard depth of roof window installation with the use of flashing is depth V- version EUV/B. EUV/B is designed for installation with a wide range of roofing materials, enabling roof window installation in various roofing applications, whereas EUV-L/B flashing is used to install window into slate roofing coverings (2 layers x 5 mm ). The flashing EU_/B as a standard is designed to be installed in single L-shaped combination but is available in repeated modules enabling L-shaped horizontal combinations as well. L-shaped flashing type is chosen on the basis of the roof window’s dimensions.

The depths of flashings installation according to the roof pitches:
— depths “V”, “N” for pitches between 15° and 55°
— depth “ J “ for pitches between 30° and 55°

Kołnierze do zespolenia kolankowego EUN/B, EUV/B, EUV-L/B

Constituents of the Flashing

The EU flashing for L-shaped window combinations consists of a flashing that seals the connection to the roof window, elements connecting the roof window to the vertical window, cladding elements for the vertical window, and coverings for the eaves sections up to 120 cm in length.

Horizontal and vertical cross-section of the flashing EUV/B
1 – flashing for the roof window (without bottom element)
2 – element connecting two windows
3 – aluminium overlay
4 – insulating wool tape
5 – side guttering in the eaves
6 – wind flap
7 – covering profile